Look at this picture
![]()
Posted via GSM Indore Mobile Connect









China Mobile Touch Screen repair(with pictures)
Touch Screen IC 4182A and MT6301 same. See X- X+ Y+ Y- reference my picture jumper.
Touch Screen use of 4-wire resistance screen, four lines are: X1, X2, Y1, Y2
X1, X2 in the horizontal direction for a change in the resistance, Y1, Y2 for the longitudinal resistivity.
How do you know which line is a two x1 x2 y1 y2? Touch panel along the four lines above are facing their own look at the screen from top to bottom in the line is about on both sides of the x1 x2 is y1 y2. Established phone touch screens measuring four points of the voltage. Two 2.7V and two 0v . two voltage are measured after boot. 2.7 v is y. X is not the voltage.
After corresponding with xy can generally be connected. If the touch panel screen and click position opposite or reverse. Swap contrast x-y reversed.
Posted via GSM Indore Mobile Connect
![]()
Ankit Verma









Look at this picture
![]()
Posted via GSM Indore Mobile Connect
![]()
Ankit Verma









![]()
__________________ Posted via GSM Indore Mobile Connect
![]()
Ankit Verma









China Mobile Touch Screen Solution Dayagram
![]()
Posted via GSM Indore Mobile Connect
![]()
Ankit Verma









how to repair touchscreen in china mobile same size but not working ?ok i am explain
this is touch in china mobile
[Only registered and activated users can see links. ]
Touch Screen IC 4182A and MT6301 same. See X- X+ Y+ Y-
[Only registered and activated users can see links. ]
every china display info of x-x+y-y+ or XR,XL,YD,YU See pix
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
XL XR
YD YU
LIKE THIS
XL =X LEFT
XR =X RITE
YD =Y DOWN
YU =Y UP
X+ =XR
X- =XL
Y+ =YU
Y- =YD
SEE PIX
[Only registered and activated users can see links. ]
how to find in touchscreen who x-x+y-y+
see the track in touchscreen
[Only registered and activated users can see links. ]
see two down side track two up side up side track x-x+ down site track y-y+
or up side XL,XR down side YU,YD
[Only registered and activated users can see links. ]
NOW YOU HAVE BOTH INFO ABOUT TOUCH AND DISPLAY X- X+ Y- Y+
[Only registered and activated users can see links. ]
SOLD WARE Y TO Y AND X TO X
YOUR TOUCH IS 100% WORKING
![]()
Ankit Verma
van'z (10-05-2011)


tested by me sir....
Ankit Verma (01-23-2012), deepak gupta (08-26-2012)
thank you sir
Ankit Verma (01-23-2012)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Members who have read this thread : 102Actions : (View-Readers)
Bookmarks